At a glance... CM 100/35
Size 100 x 35

spacerOutlets

Standard Size
"Centre Mount" Format

spacerStock Colours

Grey, Black, White, Stone Beige

 

 

  • An economy sized, unobtrusive skirting duct designed for small volume cable installations.
  • The smallest skirting duct available commonly used in small areas, tenancy fitouts or where height restrictions are encounted, ie. Under window frames etc.
  • The ECD "Centre Mount" range of skirting ducts allows for all outlets to be terminated in the equipment fit‑off zone providing an attractive symmetrical arrangement in "centre mount" format.
  • Ferrous mounting shrouds the full depth of the duct body allow maximum space for outlet termination and screening.
  • Accommodates flush mounted standard size outlets.
  • Duct and covers are powder coat finished. Standard colours are Black, White, APO Grey and Stone Beige. Over 50 non‑standard colours are available.
  • This product has been examined in accordance with AS 3000 and conforms to A.C.A. requirements.

"Easy as ECD"


Suggested Specification:

 

  • The contractor shall allow to supply and install "Electric Cable Duct Systems P/L" CM 100/35 "Centre Mount" skirting duct
    (100mm x 35mm) surface mounted or as otherwise nominated and as described below.

  • The system will reflect the integrated voice/data cabling requirements of Category 5E and have ferrous mounting shrouds for both power and voice /data outlets. Outlets shall be standard size Clipsal, HPM or PDL Type.

  • The body of the duct shall be extruded aluminium pre treated and powder coated to a standard colour (White, APO Grey, Stone Beige, or Black) or as nominated by the architect. The duct cover shall be pre‑treated electro‑galvanised steel, powder coated to match.

  • The system shall be earthed in accordance with AS3000 wiring rules and conform to A.C.A requirements.

  • Bends shall be site mitred to fine tolerances with concealed reinforcing angles riveted in position or alternatively manufactured internal / external bends . Adjacent lengths of duct body shall be splice joined with slide in joiner plates. Slide in stop ends shall be fitted where necessary.

  • Installation shall be performed by experienced duct installers, generally as described on E.C.D "Recommended Installation Procedure" leaflet.

Parts List

Description

Part No.

Colour

Duct Body ‑ 3m lengths

CM 100/35

Nominate colour

Duct Cover ‑ 1.2m lengths

CM 100 c

Nominate colour

Vertical Riser Cover ‑ 1.2m lengths

CM 10O VRC

Nominate colour

GPO Mounting Kit only (no GPO)

CM 100/35 K

Nominate colour

Voice/Data Mounting Kit only (no bakelite supplied)

CM 100/35 VDK

Nominate colour

Internal Bend

CM 100/35 IB

Nominate colour

External Bend

CM 100/35 EB

Nominate colour

Reinforcing Angle (Site mitred bends)

CM 100 RA

n/a

Stop End

CM 100/35 SE

Nominate colour

Flat Bend Plate

CM 100 FB

n/a
 
ecd cable duct - Sydney info@ecdnsw.com.au Phone: 02 9531 0468
Free joomla templates created by Lonex.